Nowadays, there are so many products of 4/10 hp submersible sewage pump in the market and you are wondering to choose a best one.You have searched for 4/10 hp submersible sewage pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 4/10 hp submersible sewage pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
918 reviews analysed
1. Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
Description
Product Description
FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity
From the Manufacturer
Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.
2. WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Feature
- N/A
- Imported
- Assembled in the US with foreign and domestic parts.
- Tested to 1 million cycles*
- Mechanical float switch provides reliable operation and allows installation in sump basins 11″ in diameter or larger
- Top suction strainer filters debris and protects pump from clogging. The pump does not require weep holes and the cast iron seal plate prevents galvanic corrosion and leaks
- High capacity 1-1/2″ npt discharge
- Heavy duty oil filled motor for long life
- Cast iron pump housing for durability
Description
Product Description
1/3 hp, cast iron, submersible sump pump, with vertical switch, pumps up to 3800 gph at 0′, designed for 11 inch diameter or larger sump basin, top suction design filters debris & minimizes clogging, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 1/3 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups. The product is manufactured in china. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU790 features durable cast iron housing for long life and quiet operation. This submersible pump is compactly designed for 11″ or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1 1/2″ discharge allows easy installation plus maximum flow. Similar applications to the following brands of submersible sump pumps , Craftsman, Zoeller, Flotec, Water Ace, Myers, Little Giant, Liberty, Pit Viper, Ridgid, Blue Angel, Sta-Rite, Starite, Diamond, Star, Flint and Walling, Coleman, Maytag, Jacuzzi, ShurDri, Shur-dri, GSW, Teel, Master Plumber, UL listed
3. Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp
Description
Product Description
Zoeller Pump Co. M-53 Mighty Mate clear effluent or dewatering submersible pump. Choice of many plumbers and contractors. 1/3 HP cast iron housing with plastic vortex impeller.
9ft. power cord. Truely a all star pump. Powder coated epoxy CI and SS fastners. Oil filled motor with thermal overload. CSA UL SSPMA
From the Manufacturer
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
4. WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Description
Product Description
1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.
5. WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Feature
- The product is manufactured in china
- Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
- The product is highly durable and easy to use. 8 feet water resistant power cord
- Easy installation and easy handling. 120 V, PSC, Oil-Filled 3/4 HP Motor
- For Use In 11 inch. Diameter or Larger Sump Basins
Description
Product Description
3/4 hp, cast iron/stainless steel, submersible sump pump, with vertical switch, designed for 11 inch diameter or larger sump basin, pumps up to 4600 gph at 0′, durable cast iron volute, reliable, reinforced poly carbonate impeller, corrosion resistant stainless steel motor housing & fasteners, top suction design filters debris & minimizes clogging, oil filled, thermally protected motor prevents overheating, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 3/4 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups, 5 year warranty. This product is assembled in the USA. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU980E submersible sump pump can move up to 4600 gallons per hour (gph). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
6. Zoeller 267-0001 M267 Waste-Mate Sewage Pump, 1/2 Horsepower, 115V
Description
Product Description
This product is high quality product and highly durable. This is easy to use and easy to install. This product is manufactured in United States.
From the Manufacturer
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
7. Liberty Pumps P382LE41 Pro380 Series Simplex Sewage System
Description
Product Description
4/10-Horse Power 24 by 24-Inch Pro380 Series Simplex Sewage System
From the Manufacturer
The Pro380-Series is a large capacity shallow system design featuring a 24 x 24-Inch basin – perfect for bedrock and difficult soil conditions. The Pro380-Series offers a large 41-Gallon capacity and longer pump cycles for extended pump life. The Pro380-Series sewage package arrives from the factory pre-assembled with QuickTree Technology saving valuable labor time at the job site. Give the Pro380 a try and see why more contractors are demanding Liberty. New QuickTree technology available on the Pro-Series allows easy inspection and replacement of the pump and/or alarm float without disconnecting plumbing or removing the pump itself. Floats are mounted on a stainless steel rod (tree) and suspended in the system by means of a holder built into the main cover. Access to the QuickTree is easily accomplished by a secondary “access” cover. To protect the system during rough-in and masonry work, the new Pro-Series are shipped with a clear disposable construction cover. This recyclable cover is simply snapped in place and can be easily removed when the system is ready for finish plumbing. The Pro380 series also features a separate access cover, an anti-flotation collar, molded torque-stops, unique integrated cord seal technology, and integral rubber cover seals.
8. WAYNE CDU1000 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch – 58321-WYN2
Feature
- Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
- Stainless steel motor housing and rugged, cast iron pump base
- Fully submersible
- 1 hp
- max. maximum flow rate is 6100 Gallons Per Hour, 5100 GPH at 10 feet of discharge lift
- 1-1/2″ npt discharge
- Assembled in the US with foreign and domestic parts.
Description
Product Description
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. the top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-inch diameter and larger sump pits.8 feet Water Resisitant Power Cord provides easy access to nearby GFCI(round fault circuit interrupter) protected outlet
From the Manufacturer
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
9. WaterAce WA50SAS Sump Pump, 1/2 HP, Black
Feature
- Heavy duty cast iron construction with thermoplastic volute
- Built-in thermal overload motor protection
- Vertical switch
- operates in basins 11” in diameter
- Non-clogging vortex, thermoplastic impeller
- 1/2” solids handling
- Download the user manual under the technical specification section of this page for safety, installation, troubleshooting, and information
Description
The WaterAce products WA50SAS cast iron sump pump is made with heavy duty cast iron construction and a thermoplastic volute. It has built-in thermal overload motor protection. The vertical switch allows it to operate in 11 inch basins. The WA50SAS has a non-clogging vortex and a thermoplastic impeller that will handle up to 1/2 inch solids. WaterAce products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The WaterAce commitment is to produce pumps for the long term at the best value. Click on the WaterAce products link at the top of this page to see more WaterAce products.
10. Simer 2961 4/10 HP Submersible Sewage Pump
Description
Product Description
4/10 HP Submersible Sewage Pump.
From the Manufacturer
4/10 HP Submersible Sewage Pump.
Conclusion
By our suggestions above, we hope that you can found 410 Hp Submersible Sewage Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
