Top 10 Nxe Range

Print the Widest Possible Range of Materials

The signature all-metal design allows you to reliably print high temperature materials, and it has added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.

High Temperature Performance

The V6 can comfortably reach 300°C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400°C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating.

Compact

E3D focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions!

Easy to Use

The new thermistor cartridge simply slides into place and is secured with a single screw. High temperature glass is used in the sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.

High Quality Printing

E3D kept the sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.

Adaptable

The V6 is a fully-integrated part of the E3D Ecosystem. E3D’s nozzles and blocks give more opportunity to choose how to print.

The AR-152A is updated CS tactical antenna ,with more flexing and better signal

Description:
1. All of our items are brand new.
2. Model: AR-152A
3. Connector Type: SMA-Female
4. Band: Dual Band VHF/UHF.
5. Frequency: 144/430MHz.
6. Gain: 2.15dBi.
7. Max Power: 20Watts.
8. V.S.W.R: Less than 1.5.
9. Impedance: 50ohm.
10. Style: Soft antenna.
11. Antenna length: 48cm
12. Weight: 120g.
Applicable Model:
for BAOFENG: BF-888S,UV-5R ,UV-5RA, UV-5RC ,UV-5RE,UV-5R8W ,UV-5RE8W,UV-5RTP, UV-8HX,UV-82,UV-82HP,UV-82HX,UV-82 Plus, A-52(II),DM-5R Plus
for Quansheng: TG-UV2 Plus
for Abbree: AR-819

Notice: If your radio model is not compatible, please see my other item or email us your model number, then, we will help you find one that suits for you.
Package Including:
1X AR-152A CS Tactical Antenna
2X Rubber Gasket

With the Guide 10 Plus Recharger you have a portable, rugged charging kit as adventurous as you are. Charge AAs from the sun or any USB port, then power your phone, MP3, GPS, or perk up your tablet in a pinch. The Guide 10 Plus USB Power Pack can be charged by connecting it to any USB power source, including Goal Zero Nomad Solar Panels, a wall USB charger, or car USB charger.

Each box comes with 60 tissues! Buy this three-box pack in bulk, so you won’t run out!

Safe contoured handle with sure grip ridges provides precise fingertip control. Easy to use handle lies in front of blade thus requiring only light gentle pull instead of pressure. Platinum coated stainless steel blades shaves close without nicks or irritation. Open design provides optimal view of shaving area. Cost effective, no need for more than one razor per procedure. 50 individually foil-wrapped razors per box WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Energizer Magnetic Play and Charge Cable with Recharge Battery. The magnetic cable attaches effortlessly to the controller and recharges the battery

This is for the Harness Only Purchase. You will need to purchase a doorways chin up bar to use. 3 Minutes A Day Sit and Decompress Therapy. The Best $75 You Can Spend For Your Health And A 60 Day Money Back Guarantee! Can You Be Pain Free In 1 Week? How About 1 Day? By harnessing gravity, you can turn the tide on the squeezing and damaging effects that gravity can cause to your spine. In just a few minutes a day using Sit and Decompress, your spine has an amazing opportunity to absorb nutrients, re-hydrate the discs, decrease pain, and reverse damage. Sit and Decompress works by using the strong pull of gravity, your body and the four unique stances that focus where you want the spinal decompression to occur. Strapping into the harness will hold your upper body in place while your mid to low back become decompressed. This is a VERY POWERFUL STRETCH, the stretch is so effective we have x-ray proof of a 50% increase in disc space. This 50% increase equates to adding about 1-2 inches in length to your spine while in the harness just using gravity. NO OTHER THERAPY HAS THIS PROOF! (See Studies Below) This decompression is unique to Sit and Decompress. If you have tried other products for spinal decompression like an inversion table, then you are a perfect customer because you can then compare the differences and benefits from the quick results that are not available with inversion therapy. Results do vary but most people notice a difference the 1st time. “There is nothing that can compete with the safety, effectiveness, and overall speed that your condition will improve. I GUARANTEE IT” Dr. Josh Dorsey Inventor/Back Pain Guru

Rechargeable battery kit for use with the FOXPRO HELLFIRE, SHOCKWAVE, KRAKATOA, CS24B. Rechargeable Lithium Battery Pack. 120VAC Wall Charger.