Top 9 Shark Leader

This Listing is for our 18/0 carbon steel inline circle hook shark rig (480# test, 7×7 49 strand construction bright stainless steel cable). Our circle hook shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco Brass Swivel. The finished rig is just over ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. Like all of our rigs, each one is made by hand in the USA. A key feature to all Cardinal Tackle Shark Rigs is the protected connections. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. The heat shrink tubing: (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

5′ braided stainless 480lb leader with Mustad circle hook can be used for shark, grouper, halibut, or any other big game species that needs protection from bite offs. All of our tackle is hand made in the USA and built on calibrated bench crimpers.

This Listing is for our 20/0 carbon steel inline circle hook shark rig (480# test, 7×7 49-strand construction bright stainless steel cable). Our shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco Brass Swivel. The finished rig is ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. Like all of our rigs, each one is made by hand in the USA. A key feature to all Cardinal Tackle Shark Rigs is the protected connections. After double-crimping the hook and swivel on our benchtop press, we cover it with a short length of heat shrink tubing. The heat shrink tubing: (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. Folks also use these rigs for land based shark fishing with a heavy monofilament leader. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

This Listing is for our 16/0 carbon steel inline circle hook shark rig (270# test, 7×7 49 strand construction bright stainless steel cable). Our circle hook shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco Brass Swivel. The finished rig is just over ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. Like all of our rigs, each one is made by hand in the USA. A key feature to all Cardinal Tackle Shark Rigs is the protected connections. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. The heat shrink tubing: (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

The Aqua Clear SH-11C Shark Surf Rig Lure is designed to reel in sharks. This rig lure comes with a fish finder and 100-pound double crimped leads. The Aqua Clear SH-11C Shark Surf Rig Lure measures 32-Inch.

This listing is for one large land based shark rig with 18/0 carbon steel inline circle hook, 480# stainless steel cable and 400# monofilament. Our land based shark rigs are the perfect combination of stainless steel cable and monofilament. Each 5.5 foot lower leader uses 7×7 49 strand construction bright stainless steel cable double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco brass swivel. After double-crimping the hook and swivel, the lower leaders connections are protected with a short length of heat shrink tubing. Each 15 foot upper leader 400# blue smoke monofilament crimped to a heavy duty snap swivel and 4/0 Rosco brass swivel. The upper and lower leaders are attached at the snap swivel, which is also the perfect spot to add your weight. The finished rig is over 15 feet long. Like all of our rigs, each Land Based shark rig is made by hand in the USA. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

Surflon 1×7 is a great all-around leader wire for toothy fish. This wire is our Surfstrand 1×7 stainless steel with a smooth coating of nylon. A specially selected grade of nylon, tough yet flexible, is used to seal out water, reduce visibility, and improve the life of the line. Compared to old style 1×3 construction, Surflon’s 1×7 construction offers higher break strength and more realistic action. Surflon 1×7 is an effective leader wire for hard-charging, toothy fish such as Bluefish, Muskie and Mackerel.

The function of fishing wire leader
1. Avoid the momentary pulling of the throwing, the friction between the main line and the guide ring will damage to the main line
2. After dragging the bait or caught fish, protect the front end of the main line to avoid rubbing against obstacles;
3. Conceal the main line, reduce the fish alertness after finding the fishing line
4, offset the momentary pulling force that may occur after caught fish, buffering function
5. The marking function when recovering the bait to prevent the bait from colliding with the leader ring of the fishing rod and injuring people;
6.The use of reliable front wires higher than the strength of the main line increases the possibility of trying to choose a finer main line, thus making the throw easier and the bait flying farther

Tooth Proof leader wire lives up to its name and provides maximum protection the ferocious jaws of Barracuda, King Mackerel, Wahoo and other toothy fish. Made from specially controlled Type 304 stainless steel alloy to be hard, but not brittle, and to deliver the perfect combination of flexibility and strength. Tooth Proof possesses incomparable abrasion resistance and tames the toughest toothy fish. AFW’s unique pre-straightening process eliminates cast, providing a straighter leader wire with improved kink resistance. Tournament tested tough, this proven leader wire continues to put anglers on the winner board!