Nowadays, there are so many products of msi exterior fan in the market and you are wondering to choose a best one.You have searched for msi exterior fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings msi exterior fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
904 reviews analysed
1. ZOTAC GeForce GTX 1080 AMP! Edition, ZT-P10800C-10P, 8GB GDDR5X IceStorm Cooling, Metal Wraparound Carbon ExoArmor exterior, Ultra-wide 100mm Fans Gaming Graphics Card
Description
FEATURES
•All-new SPECTRA lighting system
•Customize the look with a color to match your system using the all new, redesigned FireStorm Utility
•8 brightness levels to have it lit just right
•Different lighting modes
Static
Always on one color
Breathe
Fade in and out a static color
Strobe
Quickly flash off and on a static color
Cycle
Breathe in and out and changes color each time it fades in
Saved Spectra Settings
Settings are saved to the graphics card and are automatically enabled when powered on. Only when power is completely lost or when the graphics card is removed from the system will the Spectra settings be reset.
IceStorm with Carbon ExoArmor
• Full metal protection with metal front shroud and metal wraparound protection.
• Wide array aluminum fin stack
• Five variably configured copper heatpipes (2 x 8mm and 3 x 6mm)
POWERBOOST
• Equipped with special capacitors that can endure extreme temperatures and high power loads.
• Provide stable performance at fast speeds
• Ensure smooth incoming power without volatility
FREEZE • Automatically starting/stopping the fans
• Reduce overall noise
• Extended overall fan life
• Fan start/stop when temperature thresholds are met
Redesigned FireStorm utility
• Change Spectra lighting settings
• Tune speed performance
• Save profiles
• Adjust fan curves
• Monitor performance
• Simultaneous Multi-Projection
• VR Ready
• NVIDIA Ansel
• NVIDIA SLI w/ HB Bridge Support
• NVIDIA G-SYNC
• NVIDIA GameStream
SPECIFICATIONS
• NVIDIA GeForce GTX 1080 GPU
• 2560 CUDA cores
• 8GB GDDR5X memory
• 256-bit memory bus
• Engine clock (base): 1683 MHz, (boost): 1822 MHz
• Memory clock: 10 GHz
• PCI Express 3.0
CONNECTIONS
• 3 x DisplayPort 1.4
• 1 x HDMI 2.0b
• 1 x Dual-link DVI
• Quad simultaneous display capable
POWER REQUIREMENTS
• 500-watt power supply recommended
• 230-watt max power consumption
• 2 x 8-pin PCI Express power connectors
SOFTWARE COMPATIBILITY
• NVIDIA GeForce driver
• Microsoft DirectX 12 (feature level 12_1)
• OpenGL 4.5
• OpenCL
• Microsoft Windows 10/8/7 x86/x64
INSIDE THE BOX
• ZOTAC GeForce GTX 1080 AMP Edition
• 2 x Dual 6-pin to 8-pin power cable
• User Manual
• Driver disc
2. HK-Part Replacement Cpu Cooling Fan For Msi Ms-16j2 Ms-16j1 Ms-16j5 Ms-1792 Ms-1795 Ms-1791, 3-Pin 3-Wires DC5V (not GPU Fan)
Feature
- Note: Please note that this is the CPU fan. The GPU fan looks exactly the same, but orientation is in reverse which mean the two fans are not interchangeable.
- Comtible Models:for Msi Ms-16j2 Ms-16j1 Ms-16j5 Ms-1792 Ms-1795 Ms-1791
- Power Connection:3-pin 3-wire
- Warranty:6-month, if you have any pre-sale or after-sale questions please feel free to contact us,we will be happy to assist you
- Package Includes: A Brand New Working CPU cooling fan(not GPU Fan) and thermal grease(FREE)
Description
Item Features:
— Cpu Cooling Fan ( not GPU cooling Fan) — Brand new and high quality
— Good quality with reasonable price
— 3 wires / 3 pins connector
Compatible Models:
— forMsi Ms-16j2 Ms-16j1 Ms-16j5 Ms-1792 Ms-1795 Ms-1791
Package Includes:
— CPU Fan(not GPU Fan)
— Thermal Paste(FREE)
Note:
Please check your CPU Fan and compare it with our listing photo to ensure that this is the item you need. Please be informed that using your laptop model and fan part number is not sufficient basis to identify the correct replacement because they might have different appearance, screw alignment, pin connector and might not work at all series. It would be better to remove your current fan from your laptop and compare it with the picture contained within the listing. Also please be informed that our item are all sorted according to compatible laptop models. You will receive any of the part numbers mentioned above. All are compatible replacement. It can be used interchangeably. Photo is for reference only. If you have any inquiries , please don’t hesitate to contact us. And if you already bought and encountered a problem with this item, please let us know and send us the photo (front and back) of the item you received and the old fan that you will replace. Hope you understand. Thank you!
3. NZXT H510 Elite – CA-H510E-B1 – Premium Mid-Tower ATX Case PC Gaming Case – Dual-Tempered Glass Panel – Front I/O USB Type-C Port – Vertical GPU Mount – Integrated RGB Lighting – Black
Feature
- More modern: USB 3.1 gen 2compatible USB connector on the front panel makes it easier than ever to connect smartphones, highspeed external storage, and the latest peripherals to your PC
- Smart device v2: Includes two Hue 2 RGB lighting channels, and three fan channels that support 0db modes for voltageregulated or PWM fans
- Extra ordinarily beautiful: The clean, modern design, iconic cable management bar, and uninterrupted tempered glass panels all showcase your stunning build
- Powered by NZXT CAM: Use the intuitive NZXT cam application to monitor and control your build, choosing from presets or custom controls for your RGB lighting and fans to create your dream PC
- New features: Front I/o USB typec port, dual tempered glass, vertical GPU mount, and two 140 millimeter aer RGB 2 fans (included)
- Motherboard support: Miniitx, MicroATX, and ATX
Description
From the creators of the original Phantom, NZXT is releasing the next generation and flagship Phantom 820 – a remarkable engineering feat in every aspect. For those hungry for more control of their system, one of the most notable features is a fully integrated state-of-art 4-channel digital fan controller with 15 watts per channel. NZXT is also pioneering integrated Hue lighting, an illumination system for the exterior and interior of your enclosure. You can customize to your heart’s content with an infinite possibility of colors with using integrated adjustments controls. The Phantom 820 is engineered to chill even the most demanding systems, equipped with triple 200mm and a 140mm fans. Maximize the cooling potential by mounting up to nine fans to achieve unrivalled airflow in your chassis. Push the envelope and utilize liquid cooling systems that feature a push-pull configuration with top 280/360mm and bottom 240/280mm radiators up to 60mm thickness for unmatched performance. In addition, a rugged base design lifts the enclosure above ground for display and increased airflow. The Phantom is reinvented again by following its legacy of remarkable asymmetrical and award winning design.
4. Cool Attic CX1500UPS Power Gable Ventilator Fan
Feature
- VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat
- GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers
- ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction
- EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs
- HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof
5. ID-COOLING DF-12025-ARGB Trio Case Fan CPU Cooling Fan Addressable RGB Case Fan 5V ARGB MB Aura Sync PWM Fan for CPU Cooler/Raidator/PC Chassis(Remote Control Included)
Feature
- 【PWM fan】The PWM fan control allows for dynamic speed adjustment between 900 rpm to 2, 000 rpm, minimizing noise or maximizing airflow. Max. Air Flow: 56.5CFM
- Noise: 16.2~31.5dB(A)
- 【Two-way RGB Control】The Addressabe RGB lighting can sync with motherboard, a remote control is included for non RGB motherboards for customize colors.
- 【Compatibility】The standard 120X120X25mm cooling fan is designed to match the cpu cooler, cpu water cooler, pc case etc..
- 【Superior Build Quality】High quality fan blades and frame built-in extremely even light diffuser. The 120mm fan Blade engineered for Low-Noise operation without sacrificing performance
- 【Easy Installation】Standard 5V 3pin Addressable RGB header to Motherboard ARGB header
6. Pccooler 120mm Fan Moonlight Series, PC-3M120 RGB LED Computer Case Fan – PWM PC Cooling Fan – Dual Light Loop Quiet Fan/Multiple Light Modes with Controller for PC Cases, CPU Coolers (Multicolor)
Feature
- 【Intelligent Speed Control-Upgradeable to 4-in-1 kit】 3 ×120mm full function PWM fans. The intelligent temperature control mute module controls the speed at 1000~1800±10% RPM. Please order a single supplement fan in the variant if you want to upgrade this to 4 pack.
- 【Dual Light Loop Design】Addressable RGB LEDs can be controlled – 5 brightness levels 6 lighting modes 7 different colors and provide colorful streamer lighting effects.
- 【Shockproof Design】8 silicone shockproof pads ensure that the fan will not vibrate when it is running.
- 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs.
- 【Wide Compatibility】5v 3pin RGB lights connector, 4 pin PWM power connector. The fan is 12v, the RGB is 5v, please connect to the 5v 3 pin motherboard header. Suitable for water cooling and support 120/240/360mm radiators. (CPU Cooler/Computer Case/GPU etc)
7. AC Infinity MULTIFAN S7, Quiet Dual 120mm USB Fan for Receiver DVR Playstation Xbox Computer Cabinet Cooling
Feature
- Ultra-quiet USB fans designed to cool various electronics and components.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
- Dimensions: 4.7 x 4.7 x 1 in. per fan | Total Airflow: 104 CFM | Total Noise: 19 dBA | Bearings: Dual Ball
Description
Product Description
The ultra-quiet cooling fans can be positioned to stand upright or laid flat to cool various electronics and components. Features a multi-speed controller with power switch. Includes eight large anti-vibration rubber feet per fan and a 6-foot power cord. The USB plug can be plugged into the USB ports found behind popular electronics such as receivers and video game consoles. The two fans are permanently connected by a 2.5 feet cord and share the same multi-speed controller. Each unit contains an additional USB port, up to four fans can be daisy chained together to share the same power source. Certified by CE and RoHS.
Speed Controller
The fan includes an in-line multi-speed controller with power switch to set the fan’s speed to optimal noise and airflow levels for various environments.
Connecting Additional Units
For electronics and components that requires more airflow, each fan unit can daisy chain additional MULTIFAN S series fans. Up to four fans can share the same USB power source; and up to six fans can share the same thermal controller (sold separately). MULTIFAN S1, S2, S3 and S4 contains one fan, and MULTIFAN S5 and S7 contains two fans.
Applications
This ultra-quiet cooling fan is popular in a variety of electronics and components such as receivers, DVRs, video game consoles, modems, computers, amplifiers, and other audio video equipment.
8. uphere 3-Pack Long Life Computer Case Fan 120mm Cooling Case Fan for Computer Cases Cooling,12BK3-3
Description
Product description
Product Size: 120 * 120 * 25mm
Pitch: 10.5cm
Rated voltage: 12V
Current: 0.12A
Input power: 1.44W
Speed: 1200RPM (constant speed)
Air volume: 38CFM
Static pressure: 58Pa
Noise: 19DB
Weight: 130g
9. ID-COOLING ZF-12025-PINK Pink Addressable RGB Case Fan, 3pin 5V ARGB MB Sync, for Case Fan/Radiator Fan
Description
ID-COOLING ZF-12025-PINK Pink Addressable RGB Case Fan, 3pin 5V ARGB MB Sync, For Case Fan / Radiator Fan
Specifications:
Fan Dimension: 120×120×25mm
Fan Speed: 900~2000±10%RPM (PWM)
Max. Air Flow: 55.2CFM
Max. Static Pressure: 2.13mmH2O
Noise: 16.3~33.5dB(A)
Rated Voltage: 12VDC
Operating Voltage: 10.8~13.2VDC
Started Voltage: 7VDC
Rated Current: 0.25A
Power Input: 3W
Bearing Type: Hydraulic Bearing
Package Contents:
1 x ZF-12025-PINK case fan
4 x Case panel mounting screws
4 x Radiator mounting screws
ABOUT ID-COOLING
ID-COOLING is specialized in cooling products for desktop PCs and thermal solutions for industrial applications, covering CPU Cooler, VGA Cooler, Case Fan, Server Cooler, Mini Computer Cases, etc. With over 10 years’ experience in this industry, ID-COOLING enjoys a good reputation in innovation and superior quality and service.
10. Thermaltake Level 20 RS Motherboard Sync ARGB ATX Mid Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1P8-00M1WN-00
Feature
- [LIGHT UP THE SYSTEM] – 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans + ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header)
- [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] – Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software
- [27 LED MODES via I/O PORT] – Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off
- [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] – With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally
- [WINDOW PSU COVER] – Special ventilated design enhances airflow and hides unsightly cables
- [2+2+1 DRIVE BAY] – 2 5″/3 5″ x 2 with HDD Rack + 2 5″ x 2 with HDD Bracket + 2 5″/3 5″ x 1 behind MB Tray
- Supports Mini ITX Micro ATX ATX Motherboard
- I/O Port – USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1
- OUTSTANDING EXPANSION – Max CPU Cooler Height 172mm / Max VGA Length 282mm (With Reservoir) 400mm (Without Reservoir) / Max PSU Length 220mm
- DIMENSION – 21 8″ x 9 5″ x 20 6″ 27 lbs 3 Year
Description
The Level 20 RS ARGB is the second Mid-Tower within Thermaltake’s Level 20 Series featuring ARGB Lighting 4mm Tempered Glass side panels Patented Rotational PCI-e slots and the flexibility for custom cooling components The Level 20 RS ARGB comes preinstalled with two 200mm ARGB front fans one 120mm standard rear fan and an ARGB Light Bar which is synced with the ARGB fans Changing LED colors and lighting modes are made easy with an RGB button located within the I/O Panel The built-in ARGB switchboard makes it easy to synchronize lighting effects with 5v RGB capable motherboards from ASUS Gigabyte MSI and AsRock P/N CA-1P8-00M1WN-00 SERIES Level 20 MODEL Level 20 RS ARGB CASE TYPE Mid Tower DIMENSION (H X W X D) 524 x 240 8 x 553 mm (20 62 x 9 4 x 21 77 inch) NET WEIGHT 12 23 kg / 26 96 lbs SIDE PANEL 4mm Tempered Glass x 2 COLOR Exterior & Interior Black MATERIAL SPCC COOLING SYSTEM Front (intake) 200 x 200 x 30mm Addressable RGB fan (Fixed 600rpm 29 2dBA) x 2 Rear (exhaust) 120 x 120 x 25 mm fan (Fixed 1000rpm 16 dBA) DRIVE BAYS ACCESSIBLE 2 5” x 2 or 3 5”x 2 (HDD Rack) HIDDEN 2 5”x 1(HDD Bracket) 2 5” x 2 or 3 5” x 1(HDD Bracket) EXPANSION SLOTS 8 MOTHERBOARDS 6 7” x 6 7” (Mini ITX) 9 6” x 9 6” (Micro ATX) 12” x 9 6” (ATX) I/O PORT USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Button x 1 PSU Standard PS2 PSU (optional) FAN SUPPORT Front 3 x 120mm 3 x 140mm 2 x 200mm Top 3 x 120mm 2 x 140mm 1 x 200mm Rear 1 x 120mm RADIATOR SUPPORT Front 1 x 280mm 1 x 360mm Top 1 x 280mm 1 x 360mm Rear 1 x 120mm Right 1 x 360mm (Without HDD Rack) CLEARANCE CPU cooler height limitation 172mm VGA length limitation 282mm (With HDD Rack) 400mm (Without HDD Rack) PSU length limitation 220mm
P/N: CA-1P8-00M1WN-00
SERIES:Level 20
MODEL:Level 20 RS ARGB
CASE TYPE: Middle Tower
DIMENSION (H X W X D): 524 x 240.8 x 553 mm, (20.62 x 9.4 x 21.77 inch)
NET WEIGHT: 12.23 kg / 26.96 lbs.
SIDE PANEL: 4mm Tempered Glass x 2
COLOR: Exterior & Interior: Black
MATERIAL:SPCC
COOLING SYSTEM:
Front (intake):
200 x 200 x 30mm Addressable RGB fan
(Fixed 600rpm, 29.2dBA) x 2
Rear (exhaust):
120 x 120 x 25 mm fan
(Fixed 1000rpm, 16 dBA)
DRIVE BAYS:
-ACCESSIBLE 2.5” x 2 or 3.5”x 2 (HDD Rack)
-HIDDEN 2.5”x 1(HDD Bracket); 2.5” x 2 or 3.5” x 1(HDD Bracket)
EXPANSION SLOTS: 8
MOTHERBOARDS”: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)
I/O PORT: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1, RGB Button x 1
PSU: Standard PS2 PSU (optional)
FAN SUPPORT:
Front: 3 x 120mm, 3 x 140mm, 2 x 200mm
Top: 3 x 120mm, 2 x 140mm, 1 x 200mm
Rear: 1 x 120mm
RADIATOR SUPPORT:
Front: 1 x 280mm, 1 x 360mm
Top: 1 x 280mm, 1 x 360mm
Rear: 1 x 120mm
Right: 1 x 360mm (Without HDD Rack)
CLEARANCE:
CPU cooler height limitation: 172mm
VGA length limitation: 282mm(With HDD Rack), 400mm(Without HDD Rack)
PSU length limitation: 220mm
Conclusion
By our suggestions above, we hope that you can found Msi Exterior Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
