877 reviews analysed
1. DERNORD 120V 1500W Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug (1.5 Inch Tri clamp)
Feature
- With 3-Wire Electrical Locking Plug, grounded for your safety
- Easy to Install and fits Standard 1.5″ Inch (Ferrule OD 50.5mm) tri-clamp coupler of American
- SUS304 Tri-clamp Foldback heating element provides 1500w 120v of power
- The shape is to minimize length and maximize heated surfaces
- Prevent dry firing, lime deposits, and sand that would burn out ordinary elements
Description
Product Features
120V 1500W Tri-clamp foldback heating Element : Replacement American standard water heater parts
From the Manufacturer
DERNORD 120V 1500W Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Voltage: 120V
Wattage:1500W
Color: Silver
Tube length: 165mm
Tube diameter: 8mm
Ferrule OD Size:50.5mm
2. DERNORD 240V 3500W Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug (1.5 Inch Tri clamp)
Feature
- With 3-Wire Electrical Locking Plug, grounded for your safety
- Easy to Install and fits Standard 1.5″ Inch (Ferrule OD 50.5mm) tri-clamp coupler of American
- SUS304 Tri-clamp Foldback heating element provides 3500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Prevent dry firing, lime deposits, and sand that would burn out ordinary elements
Description
Product Features
240V 3500W Tri-clamp foldback heating Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240V 3500W Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Voltage: 240V
Wattage:3500W
Color: Silver
Tube length: 280mm
Tube diameter: 8mm
Ferrule OD Size:50.5mm
3. uxcell Heating Element Coil Wire AC220V 3000W / AC110V 750W Kiln Furnace Heater Wire 7.2mm 800mm 3PCS
Feature
- Wire Diameter: 1.2mm/0.047″
- Coil Diameter: 7.2mm/0.28″
- Length: 800mm/31.45″.
- Rated Voltage/Power: AC220V 3000W / AC110V 750W
- Resistance: 16-79ohm.
- Material: FeCrAl
- Main Color: Silver Tone
- Withstands temperatures up to 2100°F.
- Longer Operating Life, Stronger Oxidation Resistance, Sulfur resistance and Resistivity.
- This Heating Wire should be stretched up to at least twice as original length while using.
Description
This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)
4. DERNORD 240V 4500W Tri-clamp Ripple Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug (1.5 Inch Tri clamp)
Feature
- With 3-Wire Electrical Locking Plug, grounded for your safety
- Easy to Install and fits Standard 1.5″ Inch (Ferrule OD 50.5mm) tri-clamp coupler of American
- SUS304 Tri-clamp Ripple Foldback heating element provides 4500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Prevent dry firing, lime deposits, and sand that would burn out ordinary elements
Description
Product Features
4500W Tri-clamp Ripple Foldback heating Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240V 4500W Tri-clamp Ripple Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Voltage: 240V
Wattage: 4500W
Color: Silver
Tube length: 350mm
Tube diameter: 8mm
Ferrule OD Size:50.5mm
5. uxcell Heating Element Coil Wire AC220V 3000W / AC110V 750W Kiln Furnace Heater Wire 7.2mm 800mm 2PCS
Feature
- Wire Diameter: 1.2mm/0.047″
- Coil Diameter: 7.2mm/0.28″
- Length: 800mm/31.45″.
- Rated Voltage/Power: AC220V 3000W / AC110V 750W
- Resistance: 15-16ohm.
- Material: FeCrAl
- Main Color: Silver Tone
- Withstands temperatures up to 2100°F.
- Longer Operating Life, Stronger Oxidation Resistance, Sulfur resistance and Resistivity.
- This Heating Wire should be stretched up to at least twice as original length while using.
Description
This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)
6. uxcell 0.3mm 28AWG Heating Resistor Wire Wrapping Nichrome Resistance Wires for Heating Elements 65.6ft
Feature
- Nichrome(Cr20Ni80) heating alloy, high temperature resistant, corrosion resistant , NOT brittle at high temperatures.
- Wire Gauge : AWG28
- Wire Diameter: 0.3mm/0.012inch
- Length: 20m/65.6ft.
- Resistance : 15.4Ohm/M
- Maximum Operating Temp : 1100C(2012F).
- Material: Nichrome(Cr20Ni80)
- Main Color: Silver Tone.
- Good thermal efficiency, even heating, safe use and long service life.
Description
Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power motor and recovery charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
7. Dernord 120V 1650W Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug (1.5 Inch Tri clamp)
Feature
- With 3-Wire Electrical Locking Plug, grounded for your safety
- Easy to Install and fits Standard 1.5″ Inch (Ferrule OD 50.5mm) tri-clamp coupler of American
- SUS304 Tri-clamp Foldback heating element provides 1650w 120v of power
- The shape is to minimize length and maximize heated surfaces
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Description
Product Features
120V 1650W Tri-clamp foldback heating Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 120V 1650W Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Voltage: 120V
Wattage:1650W
Color: Silver
Tube length: 235mm
Tube diameter: 8mm
Ferrule OD Size:50.5mm
8. uxcell Heating Element Coil Wire AC220V 1500W / AC110V 375W Kiln Furnace Heater Wire 5.8mm 560mm 5PCS
Feature
- Wire Diameter: 0.8mm/0.031″
- Coil Diameter: 5.8mm/0.23″
- Length: 560mm/22.05″.
- Rated Voltage/Power: AC220V 1500W / AC110V 375W
- Resistance: 29-30ohm.
- Material: FeCrAl
- Main Color: Silver Tone
- Withstands temperatures up to 2100°F.
- Longer Operating Life, Stronger Oxidation Resistance, Sulfur resistance and Resistivity.
- This Heating Wire should be stretched up to at least twice as original length while using.
Description
This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)
9. WB44K10005 GE Range Bake Element Heating Element for General Electric Hotpoint Kenmore Stove Oven, replaces 824269, AP2030964, WB44K10001
Feature
- Part Number: WB44K10005, Replaces: 824269, AP2030964, WB44K10001, WB44K10005.
- Work for Brands: General Electric, Hotpoint, Kenmore
- This part fixes the following symptoms: Little to no heat when baking
- Element will not heat
- Oven not heating evenly
- Will Not Start.
- PREMIUM QUALITY: The replacement part is made from high quality material for long lasting.
- GUARANTEE: Discount Parts Direct is a US based company, from molding, stamping to assembly, inspection of each process has strict quality requirements and hand check. We offer customer 100% Money Back Guarantee. We appreciate your business.
Description
Replaces the following part numbers:
824269, AP2030964, WB44K10001, WB44K10005.
Works for brands:
General Electric, Hotpoint, Kenmore
Fixes the following symptoms:
Little to no heat when baking
Element will not heat
Oven not heating evenly
Will Not Start
Contact Us
If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the Discount Parts Direct storefront.
Business Wholesale
We are a small local company from Houston, Texas offer discount parts for retail and wholesale. If you need to purchase parts for business , please contact us for lower rates.
Conclusion
By our suggestions above, we hope that you can found Electrical Heating Element Wire for you.Please don’t forget to share your experience by comment in this post. Thank you!
