Top 10 Ge Interlockkit

Connecticut Electric “G2” series generator transfer switch kit featuring 30A, 10 circuit “G2” series transfer switch, 30A rainproof generator inlet box and 30A, 10 foot power cord.

Siemens standby power mechanical interlock kits provide a means to ensure that the Main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. The most common application for these kits is when a portable generator is used to provide back up power to a building. If the utility Main breaker in a panel is left in the -“ON”-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur. The ECSBPK08 will work on Siemens and Murray 200 Amp, 8 space, meter combinations with the main breaker configuration as shown in the images. The standby power breaker must be a QP or MP double pole breaker.

Product Description

The Reliance Controls PB50 NEMA 3R Power Inlet Box is an outdoor/watertight electrical inlet for a 50 Amp CS6564 generator cord. It is designed to be located outdoors where the generator is running to prevent dangerous carbon monoxide fumes from the generator from entering your house. This inlet box is then safely hardwired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors. It is designed to be wired directly to the transfer switch or panel by using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back). The exclusive patented design provides generous wiring space and facilitates rough-in. The face of the box is removable for easy placement and wiring. It is constructed of steel with rugged, anti-corrosive powder-coat paint and has a spring-loaded inlet cap to prevent moisture front entering the front-mounted connector inlet when not in use.. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

Amazon.com

The Reliance Controls 50 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit works with generators working at 12,500 watts. Using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space. The face of the box is removable for easy placement and wiring. It is cUL 1008 listed and covered by a 5-year warranty.

Product Description

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty and ships in a plain white recyclable box.

Amazon.com

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty.

The Reliance Controls CSR202 Easy/Tran Transfer Switch is easy to install and easy to use. It is ideal for controlling single-circuit farm buildings, irrigation systems, community wells, telecommunication substations, traffic signals, commercial garage doors, cell towers, sewer and water lift stations, septic pumps, industrial sump pumps, electric water heaters, electric heat and much more. The transfer switch ensures that you can safely use back up power during a power outage without having to worry about back feeding the utility line. In an emergency situation you might not think to shut off the main power source, the transfer switch makes it so you do not have to worry about that. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

Expand your control with the GE-branded Enbrighten Add-on Switch with QuickFit™ and SimpleWire™. When paired with a GE-branded smart switch or dimmer, including Z-Wave and Zigbee controls, the hardwired device completes multi-switch systems. Wirelessly operate and schedule indoor or outdoor fixtures from up to five locations for effortless management of your home.

Transform any home into a smart home with the GE Smart Lighting Control Add-On Paddle Switch. The GE Smart Lighting Control Paddle Switch replaces your current switch, uses existing wiring and provides your home with ultimate flexibility when combined with a GE Z-Wave, ZigBee or Bluetooth In-Wall Smart Switch, Dimmer or Fan Control. The GE Smart Lighting Control Paddle Switch operates as your home automation system primary control, requiring three-way or four-way wiring configurations. Three-way wiring configuration turns the light or appliance on or off from two separate locations. Four-way wiring configuration turns the light or appliance on or off from three separate locations. With an interchangeable paddle design, the paddle switch matches most standard wall plates and home decor, and includes white and light almond paddles that will match most standard wall plates (wall plate not included). This product is ALEXA COMPATIBLE, however, it REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). **This product CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).**

Set the scene with the GE-branded Unfrighten Z-Wave Plus In-Wall 1000W Smart Dimmer. When paired with a compatible hub, the hardwired smart dimmer operates powerful home lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, Home Seer, Vera, Nexia and more.

Product Description

The Reliance Controls TF151W Easy/Tran Transfer Switch is easy to install and easy to use. It is ideal for controlling a single 15 Amp circuit, such as a forced-air furnace. The transfer switch ensures that you can safely use back up power during a power outage without having to worry about back feeding the utility line. In an emergency situation you might not think to shut off the main power source, the transfer switch makes it so you do not have to worry about that. The TF151W comes with an attached 18″ flexible aluminum conduit for easy attachment to the circuit breaker panel or furnace or at any point in between. Power can be supplied from a portable generator, inverter, RV generator, fuel cell or any standby source capable of producing sufficient current. This model uses a standard grounded extension cord. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

Amazon.com

The Reliance Controls single-circuit 15 Amp furnace transfer switch is designed for use with generators with 15 Amp power outlets. It controls a single circuit, such as a forced-air furnace, in the event of a power failure, connecting it to a portable generator. The attached 18-inch flexible aluminum conduit is pre-wired and allows the unit to be easily connected at the circuit breaker panel, the furnace, or at any point in between. It can be used on any 15 Amp 120-volt forced-air furnace circuit. Simply plug a standard grounded extension cord into a power outlet on your generator and into the built-in plug on the transfer switch. It includes an indicator light, which illuminates the area around its switch during a power outage. This unit is UL listed and is covered by a 5-year limited warranty.

See all Product description