Finding your suitable readers for creality cr-10 mini cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for creality cr-10 mini cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
794 reviews analysed
1. CHPOWER CR-10 Hotend Assembly, MK8 Extruder Original Replacement, 3D Printers Parts/Accessories for Creality 3D Printer CR-10 CR-10S CR-10S4 CR-10S5
Feature
- CR-10 extruder aluminum: 100% original and high quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5
- CR-10 extruder replacement – Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- Creality CR-10 Upgraded MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 12V 40W
- CR10 extruder upgrade- Easy Install: The part aligned perfectly out of the box, can make your printer up and running in 5 minutes, it will works like a new printer.
- The wiring will fit for all of CR-10S series 3D printer, long enough for S4, S5 model. This is a perfect replacement to the CR-10 extruder. It heats well, comes with the extra 0.4 nozzles for bonus.
Description
Features:
– 100% creality upgrade and high quality material, fine workmanship and good performance.
– 3D printer accessories: Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).
– MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W.
– Suits for the filament with diameter 1.75mm, 0.4mm output diameter nozzle.
Spec:
– Installation type: External thread connection
– Application: Creality 3D printers CR-10 CR-10S S4 S5
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 12V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
– Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Included:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1 x CR-10 0.4mm Nozzle
2 x CR-10 Cooling Fans
1x Fan cover
1x Aviation connector
1x Nozzle kit-4PCS 0.4mm(BONUS)
Note:
1.Please put TMC2130 drivers in the correct direction on the board when installing.
2.Due to light and screen difference, the color may be slightly different from the pictures.
3.Please allow 1-5mm deviation due to manual measurement.
2. Aibecy 4010 Brushless Blower Cooling Fan Turbo Fan 40 40 10mm 24V DC with Ball Bearing 2Pin Connector for CR-8S Ender 3 3D Printer Hotend Extruder
Description
Features:
DC 24V 0.1A operation voltage, fit for CR-8S Ender 3 3D printer extruder.
2Pin connector, wire length approx. 100cm / 39.4in.
Waterproof , dust-proof and super noise-reduced.
Easy installation and high-efficiency heat dissipation,
Extend the life of your 3D printer, best accessory for you.
Specification:
Volume: 4010
Compatibility: CR-8S/ Ender 3
Noise: 20dBA
Speed: 7600 r/min
Connector: 2Pin
Bearings: Oil-bearing
Cable Length: Approx. 100cm / 39.4in
Rated Power: DC 24V 0.1A
Item Body Size: 4 * 4 * 1cm / 1.6 * 1.6 * 0.4in
Item Weight: 16.5g / 0.6oz
Package Size: 13 * 9 * 1cm / 5.1 * 3.5 * 0.4in
Package Weight: 18.7g / 0.7oz
Package List:
1 * Blower Fan
3. ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)
Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
4. Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
Feature
- Premium quiet fan, 40x40x10 mm, 12V, 3-pin Molex, 4500/3700 RPM, max. 17.9 dB(A), >
- 150,000 h MTTF
- Award-winning 40x10mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- Ideal replacement for noisy or broken 12V 4cm fans in 3D printers, DVRs, NAS, switches, routers, other network and storage devices, etc.
- 3-pin 12V FLX version can be run 4500 or 3700 rpm using the supplied Low-Noise Adaptors to fine-tune the fan for maximum airflow or near-silent operation
- Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers
5. CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits (with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm) fit for Creality 3D Printing Printer CR-10 CR-10S CR10S5
Feature
- Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY
- MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS
- CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
- MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W.
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
6. Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 3D Printer
Description
Specification:
Type: 4010
Materials: Plastic
Bearings: Oil-bearing
Operation Voltage: DC 24V
Fit For: Creality Ender 3, Ender 3X, Ender 3 Pro
Weight: 0.078KG
Package Included:
1x DC 24V Extruder Hot End Fan
1x DC 24V Turbo fan
7. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
8. WINSINN 24V 40mm Fan Blower for Cooling Creality Ender 3 / Pro Turbine Turbo 40x10mm 4010 DC Brushless Hydraulic Bearing, with Air Guide Parts – High Speed (Pack of 4Pcs)
Feature
- ✔️Hydraulic Bearings – High Speed version
- ✔️High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
- ✔️for Cooling Creality Ender 3 / Pro , Rated voltage: DC 24V
- ✔️4010 Blower Fan + 40mm Fan + Air Guide Parts
- ✔️Made by WINSINN.
Description
►Hydraulic Bearings – High Speed version
►High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
►For: Cooling Creality Ender 3 / Pro
►Size: 40x40x10mm
►Rated voltage: DC 24V
►With 2 x Air Guide Parts :))
—————————————————————————————————————
Package include:
►2 x High Speed 4010 24V Hydraulic Bearings Blower Fan
►2 x High Speed 40mm 24V Hydraulic Bearings Fan
►2 x Air Guide Parts
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
9. CHPOWER CR-10 hotend Assembly, MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W
Feature
- This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5
- MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W
- Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
- CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence.
Description
Overview:
· 100% original and high quality 3D Printer accessories for CR-10 CR-10S S4 S5
· Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
· MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 12V 40W
· Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
Spec:
– Installation type: External thread connection
– Application: CR-10 CR-10S S4 S5
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 12V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
– Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Included:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mmM Brass Nozzle
Please note:
Due to light and screen difference, the color may be slightly different from the pictures.
Please allow 1-5mm deviation due to manual measurement.
10. CHPOWER Creality CR-10 Bed Surface, CR-10S Ultra-Flexible Removable Magnetic Build Surface 3D Printer Heated Bed Cover, 310x310mm
Feature
- EASY REMOVAL OF PRINTS: CR-10 upgrade parts, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.
- SIZE: 300x300mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds.
- DURABILITY & EASY CLEAN: CR-10 bed surface is capable to work at 70ºC. Easy clean with alcohol.
- SIMPLE INSTALLATION: This CR-10 plate comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- MORE FLAT FOR PRECISION: Super Flatness. Prevent warping. Fast and uniform heating. More precise on printing, especially the bottom of the prints.
Description
Instructions：
The product is divided into two parts: the form of A+B
– Part A: The top is a matte surface (the same as other stickers), and the back is magnetic (the interaction with the front of Part B plays an attractive role)
– Part B: The top is magnetic (with the adsorption under the A part), the back is the 3M adhesive (posted on the printer platform, which plays a fixed role)
Description:
Easy removal Magnetic CR-10/CR-10S 3D printing platform for PLA filament material. To use this cr-10 bed surface, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing.
Feature:
1. Introducing the first ever removable, magnetically secured, cr-10 build plate for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
2. Flexible 3D Printing CR10 Build Plate: reusable, provides a durable and stable build surface whilst preventing model warping.
Kindly note:
1. This CR-10S Magnetic Build Surface is rated for PLA filaments ONLY. Any other filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will not prevent your printing from warping.
2. This cr-10 build mat 300 x 300 is not for use with high-temperature printing applications above 70°C.
Conclusion
By our suggestions above, we hope that you can found Creality Cr10 Mini Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
