509 reviews analysed
1. uxcell DC 48V Step-Down to DC 12V 20A 240W Waterproof Car Power Supply Module Voltage Converter Regulator Transformer
Feature
- Convert unstable voltage DC 48V(38V ~ 60V) to stable DC 12V 20A 240W output.
- Si-Fe Cores magnetic loop, high temperature resistance and super stability.
- IP67 Protection grade, waterproof, moisture-proof and anti-shock protection.
- Built-in over/under voltage input, overload, overheat, and short circuit protection.Widely used in bus, cmb, large trucks, motor, solar generate electricity, display screen of bus and taxi, car audio device.
- Note: It is recommended to use stable DC power for the input power supply If you use the pulsed DC power provided by the generator, please filter it with capacitor before connecting it to the converter. If you use solar panel to supply directly, please note that the open circuit voltage of the solar panel cannot exceed the maximum withstand voltage of the converter. The supply voltage should be within the rated voltage and always leave a certain margin.
Description
Descriptions:
-Our Waterproof Power Converter Regulator adopts synchronous voltage regulator technology, full import original components, can will convert unstable voltage DC 48V to stable DC 12V 20A output.
-The import high heat conduction organic silica gel filling and sealing technology-Widely used in car LED screen, GPS navigation, MP3, MP4, car DVD, hard disk player, stereo.
-Aluminium alloy shell with good heat conduction, waterproof, or other harsh environment.
-IP67 Protection grade, waterproof and anti-shock protection.
-More than 96% power conversion efficiency.
-Si-Fe Cores magnetic loop, high temperature resistance and super stability.
Safety Instructional Manual
1. The load connected to the output end of the power regulator should not be more than MAX LISTED LOAD POWER, any higher rated load will cause damage to the power regulator.
2. Can not used long time Under the MAX. LISTED LOAD POWER
3. Please connect the converter and your device as the wiring diagram provided on above picture
Specifications:
Product Name: Waterproof Power Converter Regulator
Input: DC 48V
Input Voltage Range: DC 38V ~ 60V
Output: DC 12V 20A 240W
Conversion Efficiency: More Than 96%
Overtemperature Protection: 150C
Protection Grade: IP67
Connection Wire Length: 12cm(4.7 inches)
Mounting Hole Diameter: 5mm(0.2 inch)
Mounting Hole Distance: 65mm(2.56 inches)
Body Size: 74mm x 74mm x 32mm(L*W*H)
Net Weight: 246g
Package Content:
1 x Waterproof Power Converter Regulator
Service:
1 year free replacement for defective units and 30 days unconditional return and refund; friendly customer support within 24 hours.
2. Maresh Products Shop-Vac Style Vacuum Cleaner Crushproof Industrial Style Hose with Tool Set. Has 2 1/2" Coupling for The Tank of The Vacuum and use The Standard 1 1/4" Hose attachments.
Feature
- This Premium set Compatible Shop Vac Brand Vacuum Cleaner models that have a 2 1/4″ Friction fit opening in the tank of the vacuum and use the standard 1 1/4″ hose attachments.
- This set includes: In its Original Retail Box
- 1 Deluxe crush resistant flexible hose 1 x vacuum cleaner horse hair natural bristle dust brush, 1 x vacuum cleaner crevice tool, 1 x vacuum cleaner horse hair natural bristle dust brush, 1 x horse hair natural bristle floor brush, 1 x vacuum cleaner accessory 12′ hose, 1 x upholstery tool, 2 x extension wands
- This accessory kit is ideal for cleaning out cars, garages, or home shops and commercial applications.
- The smooth hose interior provides superior airflow
- Crush resistant hose is highly flexible and durable
3. Milton S-765 1/4" MNPT V Style High Flow Coupler
Feature
- HIGH FLOW: 1/4″ Male NPT. 1/4″ Basic Flow Size. 300 PSI Max Inlet Pressure. 74 SCFM. 250 Degree F Max Temp.
- COMPATIBLE: Will also accept both M-Style and A-Style plugs. V-style is recommended to retain maximum flow.
- V-STYLE: Milton V-style, ColorFit V-style, + competitor V couplers/plugs are all compatible!
- IDEAL: For High Volume, Low Pressure pneumatic applications.
- SLEEVE RELEASE: PUSH to connect to plug, PULL sleeve back to remove. Buna-N seals.
- Milton is your number 1 source for Quality Air Accessories
- Since 1943 Milton has been producing Quality Air Accessories
- Milton covers automotive, industrial, hardware, agriculture, heavy-duty fleet and MRO markets
4. 2Pairs Power/Ground Input Wire Gauge Reducer 1/0 to 4 Gauge with AWG 1/0-3/8inch Battery Terminal Connectors and heat shrink tube
Feature
- Includes (2) 1/0 to 4 Gauge Reducer ,(2) AWG 1/0-3/8″ battery cable lugs and (2) heat shrink tubes
- 1/0 AWG to 4 ga AWG amp input adapter,Ideal for Power or Ground Cable
- No Crimping required,Allen Screw Clamping
- Heat Shrink is Adhesive Lined for air tight seal
- Wire lugs is Made from 100% Copper for Maximum Conductivity,Heavy duty Electrical wire Lugs are great for inverters, Battery and automotive applications.
Description
1/0 to 4 Gauge Wire Reducer:
Ideal for Power or Ground Cable
Set Screw ensures Tight Connection
Flat Pin Connector at Amp Input
Ultra Conductive
Wire lugs :
Made from 100% Annealed Electrolytic Grade Copper for Max Conductivity
Heavy Duty Construction for Enhanced High Temperature Durability
Close End Pad Seals Out Moisture Keeping Cables Dry
Can be Crimped or Soldered
UL Tested & Approved
Package:
2 x 1/0 to 4 Gauge Reducers
2 x 1/0-3/8″ battery ring terminals
2 x heat shrink tubes
5. Holley 0-15Psi Fuel Pressure Gauge
Description
This mechanical fuel pressure gauge is a dry mechanical style gauge with 0-15 and 0-30 PSI increments. It fits all Holley fuel lines and fuel blocks. It has a Black face with White numbers, white pointer, and chrome bezel. It will directly screw into any 1/8 pipe thread female port.
6. Stinger SPT521 Gauge Reducer 1/0 Gauge Input to 4 Gauge Pin
Description
Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin
7. AUTO METER 17218 Gauge Works Dual Pillar
Description
Gauge Works provide a clean, smooth way to mount gauges. Models are molded in black RevoTech plastic to prevent fading and cracking, ready to be painted to match the interior or custom color scheme.
8. Tooluxe 03703L 3/8" and ½" Dual Drive Beam Style Torque Wrench, Hardened Steel | 0-150 Ft. Lbs.
Feature
- Beam style torque wrench uses a calibrated scale fitted to the handle to precisely measure torque, graduated tip prevents parallax error
- Constructed with a powerful steel alloy and a durable corrosion-resistant mirror-chrome finish
- Intuitive scale is calibrated in both directions from 0 to 150 foot-pounds (SAE)
- also in metric from 0 to 20 meter-kilograms for quick and easy readability
- Beam deflection wrenches provide precise readings every time, do not come out of calibration like a drive click torque wrench
- Both 3/8-inch and 1/2-inch anvils are included for added versatility, the 17” long shaft and grooved handle help to supply ample torque
Description
Get the most precise readings every time and get the job done better. Perfect for accurately tightening and loosing nuts and bolts for all your vehicle and other appliances. The intuitive scale is calibrated in both directions from 0 to 150 foot-pounds. Constructed with a powerful steel alloy and a durable corrosion-resistant mirror-chrome finish with an added textured black handle for the best grip possible.
9. HornBlasters 200 PSI 2 Inch Air Gauge
Description
This premium 200 PSI gauge provides accurate reading of your tank pressure with an easy to read display. The gauge also features 1/4in male NPT threading to make your life easier (normal gauges are threaded 1/8in and need a reducer, or specialty fitting) This gauge is a must have for any air system! Even if you have a digital gauge in the cab, we recommend putting one of these on your tank for convenience. This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
10. Westbrass D402NE-1-05 1-1/2" New England Style P-Trap with High Box Flange, Polished Nickel
Description
Product Description
This LA/New England style 1-1/2 in. x 1-1/2 in. or 1-1/4 in. p-trap, designed to beautify modern Schedule 40 or ABS or PVC DWV systems, using a special, plated brass cover tube and high box flange. For use with ABS or PVC drain, waste and vent. 1-1/2 in. x 1-1/2 in. J-bend. 6 in. cover tube, D4094 high box flange. Schedule 40 1-1/2 in. PVC male adapter included.
From the Manufacturer
Westbrass was founded in 1935 by two brothers, Jack and Aaron Kagan, to serve the needs of all plumbing wholesalers on the West Coast. The product lines at the time included items such as faucets, valves, malleable fittings, etc. After becoming the premier distributor of plumbing products, the company was bought in 1985 by Max Homami. Seeing a boom in the Home Improvement Industry, Mr. Homami had a vision to make Westbrass the leader in Kitchen & Bath Accessories.
The company currently manufactures its own products made of the highest quality materials. In order to ensure the excellence in the industry, these products are made to pass the highly stringent requirements of NSF, IAPMO, ADA and many other regulations. The Los Angeles-based company now sells a wide range of Plumbing Specialty Products, Bath Waste & Overflows, as well as Decorative Kitchen & Bath Accessories worldwide.
Westbrass holds several patented items including the Deep Soak Overflow designed for extra-deep soaking in most bathing-wells, the Closing Linear overflow and several other intellectual properties. The customer base includes kitchen & bath showrooms, plumbing wholesalers and supply houses, OEM and ODM companies, as well as several national home centers.
Conclusion
By our suggestions above, we hope that you can found Dash Gauge Reducer for you.Please don’t forget to share your experience by comment in this post. Thank you!
