Nowadays, there are so many products of gas line cooktop in the market and you are wondering to choose a best one.You have searched for gas line cooktop in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings gas line cooktop which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
929 reviews analysed
1. Whirlpool 30-48KITRC Gas Range Connector Kit
From the Manufacturer
Everything you need to hook up your gas range Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.
2. Stanbroil One Stop Gas Appliance Hook Up Kit – Brass Gas Ball Valve and Flexible Gas Connector w/Fittings
- Highly durable, easy to install and use for most gas appliances
- 1/2″ OD x 3/8″ ID, 22″ stainless steel flexible gas connector with 1/2″ Female Flare on both end
- Brass Shut-off valve 1/2 female NPT x 1/2 Male Flare
- 3 different couplings,1/2″ male Flare x 1/2″ NPT, 1/2″ male flare x 3/8″ male NPT, 1/2″ male flare x 3/8″ female NPT
- CSA certified
Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters
3. Dormont 0240892 Gas ApplianceConnectorKit 48 In. Long 5/8 In. Outlet Diameter Yellow Coated
- COMPLETE GAS RANGE INSTALL KIT: “Safety Shield” coated gas range or furnace installation kit
- LEAK TESTED GAS KIT: 5/8-Inch OD x 48-Inch length coated stainless steel gas connector
- GAS INSTALLATION KIT INCLUDES: two 1/2-Inch MIP (tapped 3/8-Inch FIP) brass adapters and one 3/4-Inch MIP (tapped 1/2-Inch FIP) adapter
- BEST GAS DRYER CONNECTOR KIT: Made in the USA. Everything you need to hook up your gas dryer
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals
4. Gas Pressure Regulator, Gasland chef GS-ED1 5/8" FPT In/Out Gas Pipe, 1/2 PSI(3.5 kPa) Gas Inlet LPG10"WC. & NAT5"WC. Gas Pressure Regulator for Liquefied Propane and Natural Gas, Easy To Install
- ⚙【GAS TYPE & PRESSURE】 Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3″ – 6″ Water Column
- ⚙【PIPE THREAD SIZE】 3/4″ Inlet & 3/4″ Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture’s table.
- ⚙【CAUTION】 This regulator has 1″ openings for 3/4″ gas pipes. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- ⚙【MARKING】 Model: RV48L, Marking: 1/2 PSIG, Po 3″ – 6″. Inlet pressure 1/2 PSI. Adjustable outlet pressure 3″-6″ Water Column.
- ⚙【OPERATE TEMPERATURE】 32°F – 225°F (0°C – 107°C), Indoor Only, Not for outdoor usage. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Gasland chef gas pressure regulator has 1″ openings for 3/4″ gas pipes. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying. Do not install the regulator too close to the heating equipment or use in very cold environment.
Brand: Gasland chef
Gas type: Natural Gas (NG)
Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar)
Outlet pressure range: 3” – 6” Water Column
Ambient operating temperature range: 32°F – 225°F (0°C – 107°C)
Refer to the pictures on how to find the correct pipe thread size. This regulator has 3/4″ openings for 1/2″ gas pipes. 1/2″ IN and 1/2″ OUT Female Pipe Thread. The 1/2″ gas pipe means interior diameter 1/2″ but outside diameter is 3/4″, refer to the pictures before buying.
NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS
The pipe fittings for this regulator are based on NPT pipe threads – dimensions according ANSI/ASME B1.20.1 standards
Install the regulator properly with gas flowing as indicated by the arrow on the casting
*NOTE – Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator
WARNING: The NPT thread size is NOT referring to the size of the thread itself!
The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe
Measuring the pipe will often mislead you into choosing the wrong pipe size
The “pipe thread size” is measured and based on the inside of the pipe
A lot of people measured the thread / the opening for the thread/outside diameter！
5. 72" Flexible Stainless Steel Gas Appliance Line with 1/2" OD 1/2 MIP x 1/2 FIP
- This is for gas dryers and not for ovens or ranges
- 72″ Flexible Stainless Steel Gas Appliance Line
- 203-3132-72 – 6 Feet Long
- This item is not universal. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
- Inner dimensions of this line are 3/8″. Make to measure before ordering or will not fit.
72″ Flexible Stainless Steel Gas Appliance Line With 1/2″ OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2″ OD (3/8″ ID) 1/2 MIP x 1/2 FIP – Yellow Coated.
6. PROCURU 5/8" OD x 72" Gas Flex Line Connector Kit for Stove Range, Furnace WeatherProof Stainless Steel with SafeGuard Coating
- 5/8″ Outer Diameter x 72″ Length (6 Ft.) Stainless steel gas connector with SafeGuard coating for anti-corrosion and air-tight protection
- (3) Brass fittings included: 1/2″ MIP (tapped 3/8″ FIP) (2 pcs), and 3/4″ MIP (tapped 1/2″ FIP) (1 pc)
- 4-Mil High-density gas PTFE sealant tape 1/2″ x 520″, Installation instructions included
- Designed for stoves, range, furnace, and other natural gas and propane appliances
- 100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, propane, LP, and LP-gas air mixtures
PROCURU Gas Connector is tested and certified by CSA for indoor and outdoor use. Approved for LP or Propane including Natural Gas used in common appliances. 100% leak tested for safe and reliable performance. SafeGuard Coating adds patented layer of protection on Corrugated Stainless Steel Tubing against corrosion and common household cleaning agents.
7. Empava 36" 5 Italy Sabaf Sealed Burners Gas Stove Top Gas Cooktop Black Tempered Glass LPG/NG Convertible EMPV-36GC905
- ???? Designed and Engineered in USA with 2 Years US Based Manufacture , DOUBLES the usual industry for an exceptional quality Empava stove top
- ???? LPG/NG Convertible (Both Nozzles Included) delivers the same maximum BTU power to propane and natural gas cooktops – Works manually w/o electricity. Capable for multi-purpose such as RVs, light cooking family, small kitchen, mobile home and outdoor use, etc. Compatible to install above any Empava 24/30 in. under-counter single wall oven
- ???? The 5 World Class Made in Italy SABAF burner gas cooktops by Empava features one of the latest flame failure thermocouples auto shut off protection technology that prevents gas leak to keep your home and family safe
- ???? Enjoy minimal cleanup with sealed burners to prevent food from falling into them. Stain and heat discoloration resistant black tempered glass surface will provide you with a reliable cooktop for years to come
- ???? The durable knobs and laser cut full-width edge-to-edge heavy cast iron grates can be cleaned in the dishwasher for hassle-free, effortless cleaning and maintenance to enhance the premium look
- ???? Empava recessed gas cooktop offers you the flexibility you need to make all your favorite dishes with precision and flair 4 different versatile burner size with a Dual Ring 12000-BTU burner, a 10000-BTU burner, double 6500-BTU burner and 4000-BTU burner distribute even heat for simmer, boil, stir-frying, steaming, melting or even caramelizing!
- ???? Now you are cooking! Enjoy all these features even more by knowing this cooktop. Product Dimensions: 35. 43 in. L x 20. 47 in. W x 4. 52 in. H, Cutout Dimensions: 34. 1 in. L x 19. 1 in. W. Pre-installed 110v power cord, Natural Gas Regulator and LPG Nozzles included. (LPG Conversion Kit Included)
The next high-end US & Canada CSA certified gas cooktop by Empava Appliances , it’s the real “secret weapon” behind many great meals. Let this gas operated appliance give you the utmost in cooking flexibility and help you cook like a professional chef in your own home. Still hesitating? Check out the Empava electric induction cooktop and wall ovens as well! .
8. BrassCraft CSSL87-60 P 3/8-Inch FIP x 3/8-Inch MIP x 60-Inch ProCoat Gas Appliance Connector with3/8-Inch OD
- 3/8 In. OD x 60 In. stainless steel connector w/corrosion resistant coating
- 3/8 In. FIP and 3/8 In. MIP (1/8 In. FIP tap) steel gas fittings
- 24,900 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Brass Craft’s 3/8 In. FIP x 3/8 In. MIP x 60 In. Recoat Gas Appliance Connector is 3/8 In. OD (1/4 In. ID) tube with a maximum operating capacity of 24,900 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft’s 3/8 In. FIP x 3/8 In. MIP x 60 In. ProCoat Gas Appliance Connector is 3/8 In. OD (1/4 In. ID) tube with a maximum operating capacity of 24,900 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
9. Flextron FTGC-YC38-48 46" Flexible Epoxy Coated Gas Line Connector with 1/2" Outer Diameter and Nut Fittings, Yellow/Stainless Steel
This is a Flextron gas connector from their Yc38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters. It has an outer diameter of 1/2″ and an inner diameter of 3/8″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. On the ends of this 46″ long connecter are nut fittings. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0.5 psi. Please consult the product information for the flow capacity for this part, for natural gas. The part meets the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 f.
By our suggestions above, we hope that you can found Gas Line Cooktop for you.Please don’t forget to share your experience by comment in this post. Thank you!