Top 10 Shark Bite Plumbing Fittings 1

Product Description

Easily connect pipe in seconds with the SharkBite Push-To-Connect 1-Inch Tee. This plumbing fitting joins copper, PEX, CPVC, HDPE, or PE-RT pipe in any combination. With no soldering, clamps, or glue required, connections are as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the simple SharkBite disconnect tool. The SharkBite Tee is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

“

SharkBite 1 Inch Tee Pipe Connector
Connect pipe in seconds with relative ease using the SharkBite Push-To-Connect 1-Inch Tee Pipe Connector. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, it’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

“

Product Description

SharkBite 1 Inch by 1 Inch Straight Male ConnectorConnect pipe in seconds with relative ease using the SharkBite Push-To-Connect 1/2-Inch by 1/2-Inch Straight Male Connector with MNPT Adapter. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, it’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required.CUT. PUSH. DONE.The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.SHARKBITESharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Easily connect pipe in seconds with the SharkBite Push-to-Connect 1/2-Inch 90-Degree Elbow. This plumbing fitting joins copper, PEX, CPVC, HDPE, or PE-RT pipe in any combination. With no soldering, clamps, or glue required, connections are as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite Elbow is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

Product Description

Easily connect pipe in seconds with the SharkBite Push-to-Connect 1-Inch 90-Degree Elbow. This plumbing fitting joins copper, PEX, CPVC, HDPE, or PE-RT pipe in any combination. With no soldering, clamps, or glue required, connections are as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite Elbow is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

1/2″ x 1/2″, lead free. Female iron pipe elbow, Shark Bite push fit fittings for use with copper tubing copper tube size, cpvc & PEX, with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to ASSE1061/Nsf61 standards, meets upc, ipc & cupc requirements, fittings are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panel, lead free Compliant to federal law 111-380, bagged.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

CUT. PUSH. DONE. Ideal for making quick repairs on copper and CPVC pipe. Remove and repair up to two inches of damaged pipe using a single fitting, no additional pipe required. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting’s stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal. No soldering, no clamps, no glue. SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results.

From the Manufacturer

SharkBite U3020LFA Slip Coupling 1-Inch X 1-Inch Lead Free

The SharkBite PVC x MNPT Adapter plumbing fitting allows you to connect to Schedule 40, 80 or 120 PVC pipe using a push-to-connect connection and gives you a Male threaded (NPT) Adapter on the opposite end.

Product Description

Shark Bite 1 inch Push-To-Connect End Cap Cap off pipe in seconds with relative ease using the Shark Bite Push-To-Connect End Cap. The Shark Bite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The Shark Bite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. CUT. PUSH. DONE. The Shark Bite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the Shark Bite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue. Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, Shark Bite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, Shark Bite fittings are the push-to-connect solution for leak-free results. is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, Shark Bite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

Shark Bite 1 Inch Straight Coupling Connect pipe in seconds with relative ease using the Shark Bite Push-To-Connect 1-Inch Straight Coupling Plumbing Fitting. The Shark Bite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The Shark Bite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. CUT. PUSH. DONE. The Shark Bite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the Shark Bite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue. Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, Shark Bite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, Shark Bite fittings are the push-to-connect solution for leak-free results.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

SharkBite 1″ Female ConnectorConnect pipe in seconds with relative ease using the SharkBite Push-To-Connect 1 inch Female Straight Coupling. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, it’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required.
CUT. PUSH. DONE.The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.