Finding your suitable readers for universal thermostat for heating and cooling auqarium is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for universal thermostat for heating and cooling auqarium including detail information and customer reviews. Let’s find out which is your favorite one.
540 reviews analysed
1. Pymeter Digital Temperature Controller Heat Mat Dual Thermostat Outlet Heating Cooling for Homebrew Reptile Aquarium Greenhouse Heater
- ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
- ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
- ✓【Safe and Reliable】Support High and Low Temperature Alarm
- Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
- ✓【Enhanced Functions】Power-Off Memory
- Power-On Delay
- Temperature Calibration.
- ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
2. Orbit 83521 Clear Comfort Programmable Thermostat with Large, Easy-to-Read Display
- Beautiful and contemporary design complements any décor, with large display and warm backlight for easy viewing even from across the room
- Early start mode ensures the desired temperature is reached by the programmed time, making for a comfortable home whenever you need it
- 7-Day programmability: program each day individually with up to 4 programming periods. This thermostat is not compatible with base board heaters (or other line voltage heating), multi-stage heating or cooling systems, or 3-wire hydronic systems
- Copy feature (from day to day), as well as permanent and temporary hold mode, reduces programming time and makes it easy to use
- Accurate temperature readings – to +/- 1 degree in Fahrenheit and Celsius – for ultimate consistent control
- One-stage thermostat that works with gas, oil or electric furnaces, central air conditioners, 2 wire hot water systems, millivolt systems, central heating and cooling systems, and heat pumps without auxiliary/backup heat.
Orbit’s clear comfort Pro THERMOSTAT combines all the features of a fully Programmable energy-saving THERMOSTAT with a contemporary design that looks great in any home. Full 7-day programmability eliminates the need for manual adjustments and allows for customization of heating and cooling with up to four periods per day.
3. RioRand 12V DC Digital Cooling/Heating Thermostat Temp Control -50-110 °c Temperature Controller 10A Relay with Waterproof Sensor Probe
4. Pymeter Digital Temperature Controller Programmable Outlet Thermostat Heating & Cooling for brewing Fermenter Greenhouse Incubator
- This temperature controller is designed with dual power sockets, just plug & play.✔
- Dual relay, able to control both heating and cooling device at the same time, or control separately.✔
- Dual waterproof sensors, turn device on and off at desired temperature, very easy and flexible to use.✔
- Thermostat is with Celsius / Fahrenheit Read-out.✔
- High and Low Temperature Alarm, Temperature Difference Alarm, very useful to keep your Greenhouse, Aquarium and Pet safe.✔
Pymeter PY-20TT is easy to use, just plug & play, safe & reliable dual output temperature controller. It is used as over temperature protection or automatic temperature control system with various electric appliances such as equipments for home brewing, aquarium heater, pet breeding, incubation, BBQ, seedling heat mat, oven temperature control, terrestrial heat control, fermentation, accelerating germination, electric radiator, electric oven, heat mat, etc.
PY-20TT is designed with dual relay and dual output, can be used to control both heating and cooling device at the same time, it also can be used to easily control single heating or cooling device. It’s equipped with dual temperature sensors, be able to set ON and OFF point for each output.
FOR EXAMPLE: for each socket, can set power ON tempeature at 68°F, and set power OFF temperature at 86°F, or set ON temperature at 95°F, and OFF temperature at 77°F.
- Designed with dual power sockets, just plug & play;
- Dual relay, able to control both heating and cooling device at the same time, or control separately;
- Dual waterproof sensors, turn device on and off at desired temperature, very easy and flexible to use;
- Celsius or Fahrenheit Read-out;
- Dual LED display, read temperature from 2 sensors;
- High and Low Temperature Alarm;
- Temperature Difference Alarm, very useful to keep your greenhouse, aquarium and pet safe;
- Power-on delay to protect output device from excessive on/off toggling;
- Temperature Calibration;
- Settings are retained even when power off.
Temperature Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy: ±1°C / ±1°F
Input Power: 85~250VAC, 50/60Hz
Output Power: 85~250VAC, MAX 10A 1200W
5. WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
1x WH1436A Temperature controller
1x sensor cable
6. Temperature Controller, KKmoon AC110-240V 10A LED Digital Intelligent Pre-wired Temperature Controller Outlet with Sensor Thermostat Heating Cooling Control Switch
- ◕‿◕【TEMPERATURE SHOW】Show the measured temperature, start temperature and stop temperature at the same time.
- ◕‿◕【LED DISPLAY】Digital tube LED display for clear readings, 4 buttons for easy operation. Indicator light for indicating working status.
- ◕‿◕【HEATING/REFRIGERATION】Pre-wired cord with a plug, plug and play design for convenient use.Heating/refrigeration modes, users can set the start/stop temperature freely.
- ◕‿◕【CELIBRATION FUNCTION】Temperature measuring range: -9°C~99°C
- resolution: 0.1°C.Also with temperature calibration function.
- ◕‿◕【USE WIDELY】Suitable for a wide range of applications, such as fish tank, floor heating, green house, etc.
7. Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
- ????????Fahrenheit and Celsius Display Can Be Choose
- ????????Alarm When Temperature Exceeds the Limit or When Sensor Error
- ????????2 Relays, Switch Between Cooling and Heating Modes
- ????????Control the Temperature by Setting the Temperature Set Value and the Difference Value
- ????????Temperature Calibrating, Refrigerating control output delay protection
8. Flexzion All-Purpose Digital Temperature Controller + Contact Sensor 2 Relay Output Types Aquarium Thermostat 110V Stc-1000 with 2M Cable Probe Cooling Heating for Home Brew Hatch
- Switch the modes between refrigerating and heating
- Control temperature by setting the temperature setting value and the difference value
- A mini temperature controller, temperature calibration
- Refrigerating control output delay protection
- Alarm when temperature exceeds temperature limit or when sensor error
All-Purpose STC-1000 Digital Temperature Control Controller with Sensor 110V. All parameters can be set to default setting after short circuit. With large and clear LED display for better readability, it can be used for domestic freezer, water tanks, refrigerator, industrial chiller, boiler, steamer, industrial equipments and other temperature-controlled systems.
- Temperature measuring range: -50 to +99 C
- Resolution: 0.1C
- Accuracy: +/-1 C (-50 to +70 C)
- Sensor error delay: 1 minute
- Power supply: 110VAC +/-10%, 50/60Hz
- Power consumption: </= 3W
- Sensor: NTC sensor (1PC)
- Relay contact capacity: Cool 10A/250VAC; Heat 10A/250VAC
- Ambient temperature: 0 to +60 C
- Storage temperature: -30 to +75 C
- Relative humidity: 20%~85% (No condensate)
- Front panel size: 75(L) x 34.5(W)mm
- Mounting size: 71(L) x 29(W)mm
- Product size: 75(L) x 34.5(W) x 85(D)mm
- sensor length: 2m include the probe
- 1x Mini Digital Temperature Controller Thermostat Aquarium
- 1x Temperature sensor probe with 2M cable
- 1x Instruction Manual
9. Elitech STC-1000 Pro Digital Temperature Controller Thermostat US Socket, Two Pre-Wired Heating and Cooling Outlets, Centigrade/Fahrenheit LCD Display, Plug Sensor, 49°F-239°F 110V 100-250V 10A 1200W
- 【Upgraded Version of STC-1000】Its large LCD screen, simple 3-button, 2-relay output and pre-wired design, making it easier to be used by play and plug.
- 【Wide Temperature Range】It measures from -49℉～239℉ and starts cooling or heating according to configured parameter, which will allow it to keep desired temperature anytime.
- 【Multi-functional Setting】The functions include setting high or low alarms, protection time(cooling mode only), temperature calibration, ℃/℉ and etc.
- 【Safe & Reliable】The fireproof ABS case will be more safer when in use.
- 【A Variety of Use】This controller can be widely used under various scenarios and electric appliances that need automatic temperature controlling such as culture fermentation home brew, aquarium, incubation, pet breeding, seedling heat mats, etc. 24/7 US Technician Support via Email and Phone.
10. Inkbird 10A Heat Mat Temperature Controller C206 Seeding Thermostats with Outlet and 6.56 Feet NTC Sensor No Cooling and Timer Function
- ????????【Only Heating】Please note: It’s a heating controller. There is no cooling function.
- ????????【Multipurpose】C206 Temperature controller can keep your desire temperature for your seed heat mat, aquarium heater, brewing heater, etc.
- ????????【Three Display Window】Be able to display 3 different details such as the measured temperature, the low and high temperature at the same time.
- ????????【Waterproof Probe】The NTC stainless probe is waterproof, IP68 Grade. Its diameter is 1.57″x 0.2″.
- ????????【Design & Function】Support reading with Centigrade or Fahrenheit and Temperature calibration. Plug and play design, easy to use.
By our suggestions above, we hope that you can found Universal Thermostat For Heating And Cooling Auqarium for you.Please don’t forget to share your experience by comment in this post. Thank you!