634 reviews analysed
1. Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
Feature
- 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
- 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
2. Engineer SS-02 Solder Sucker
Description
High Powered Solder Sucker How to use Product Step 1 – Press the plunger down until it is been locked and you will hear a click Step 2 – Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid Step 3 – Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump’s tip, pull the trigger Step 4 – Repeat this process if necessary
3. Pro Digital Vacuum Desoldering Station, Anesty Professional Removal Rework Station ZD-915 Iron Gun Built-in Vacuum Pump
Feature
- The vacuum desoldering station designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering/desoldering all types of DIP components.
- Reasonable structure, single hand operation and strong absorbing power can easily remove of the residual solder from one-sided or two sided of the PCB.
- The desoldering iron gun if controlled automatically by the micro-processor.
- The heating element is made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.
- LCD (display data: set temperature, actual temperature)
4. Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack
Feature
- Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck
- Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily
- Very sturdy,will worke good to remove existing solder from a circuit board
- Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering
- A must have excellent solder sucker which fits nicely in your tool box
5. YIHUA 948-II 4 in 1 Hot Air Rework Soldering Iron and Desoldering Suction Tin Gun Station with Suction Pick Up Pen °F /°C
Feature
- 【Three in one design】This unit features a 75 watt De-soldering station, a 650 watt hot air gun, a 60 Watt soldering station.
- 【Digital Temperature Correction】If the environment affects or replaces the heating element, soldering iron as well as other parts, the temperature of the soldering iron will deviate from the display, which can be corrected by this function.
- 【PID Temperature Control Technology】 Implanted the highest-end precision PID temperature control program, the machine can monitor and correct the actual temperature of each soldering station at high speed with fast temperature compensation.
- 【No Air Protection】If the fan of hot air gun stops unusually during the use, the program will automatically set an alarm and cut off the power supply to the heating core to ensure safety.
- 【More User-friendly Features – 1 Year US Warranty】Celsius / Fahrenheit Temperature Display, Sleep function, Air gun automatic / manual. Cool / hot air conversion at the flip of a button. 1 Year Warranty.
Description
Quiet yet powerful, practical but stylish and simple to use with advanced technology, YH 948 II has all the hallmarks of a top quality appliance for de-soldering. Featuring PID technology which is ideal for real-time temperature correction and make it more stable with less error.
Space saving, this four in one machine is designed based on the market needs, which combines together with hot air gun rework station, desoldering station, soldering iron and suction pen functions and brings you convenience.
What’s in the box?
1 xYH 948-II 3 IN 1 HOT AIR REWORK AND SOLDERING STATION
1 x YH 948-II SOLDERING IRON WITH SILICONE CORD
1 x YH 948-II DESOLDERING GUN WITH SILICONE CORD
4 x DESOLDERING GUN NOZZLES (0.8mm, 1.0mm, 1.2mm, 1.2mm)
1 x YH 948-II HOT AIR GUN WITH SILICONE CORD
1 x EXCLUSIVE SOLDERING IRON STAND WITH A BLUE CLEANING SPONGE
1 x YH 948-II VACUUM SUCTION PEN
1 xSUCTION PICK-UP TOOL WITH 2 VACUUM PROBES & 4 SILICONE VACUUM CUPS
4 x HOT AIR GUN NOZZLES (4.4mm (0.17″), 7.0 mm (.27″), 9.0mm (.35″) and 12.0mm(.47″))
1 xCERAMIC COLUMNED HEATING ELEMENT
1 xPINPOINT ANTI-STATIC/ANTI-MAGNETIC TWEEZERS
1 xROLL OF GOOTWICK
1 x SOLDERING PASTE
1 x IC POPPER
OTHER SPARE PARTS
Specifications:
- Maximum power: 725W
- Power supply voltage: 110V
- Working temperature: 32~104℉/0~40℃
- Storage temperature: -4~176℉/-20~80℃
- Hot air gun part:
- Power: 650W
- Temperature range: 212℉~896℉
- Air mode: brushless fan and soft air
- Maximum Air flow: 120L/min
- Display mode: LED digital tube
- Temperature stability: ±1.8°F/1.0°C(static)
- Desoldering station part:
- Power: 75W
- Temperature range: 662℉~896℉
- Tin soldering pump power: 12W
- Vacuum degree of tin soldering pump: 0.12 MPa
- Display mode: LED digital tube
- Temperature stability: ±1.8°F/1.0°C(static)
6. AUSTOR 1 Piece Desoldering Sucker and 6 Pieces Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux – Desoldering Vacuum Pump Solder Removal Tool
Feature
- High efficiency solder sucker – the desoldering pump designed with double ring and “vacuum” open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Desoldering braid wick with rosin – 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size
- geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- High quality material – the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- Wide application – correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- 7-in-1 solder removal tool – 1pcs solder sucker and 6pcs solder wicks in 3 size
Description
AUSTOR 7 Pieces Solder Sucker & Desoldering Wick kit, including 1 Piece Desoldering Sucker and 6 Pieces Solder Braid Solder Wick
Product instruction
How to Use the Solder Sucker
Product instruction
How to use the solder sucker
First: press down the plunger until it is locked with the sucker.
Second: heat up the solder until it become liquid.
Next: place the solder sucker near to the liquid,then press the button.
Last: repeat this process if needed.
Note
1. Don’t take apart the nylon suction nozzle when you recive the desoldering sucker first time to prevent escapes.
2. Don’t forget to put the black elastic back on the sucker after you pour the scruff out of it, then screw the nylon suction nozzle to ensure the sucker can be normal use.
3. If you find the double sping device no spring pressure when pressing the plunger, check whether the nylon suction nozzle had been screw tightly.
How to use the solder wick
First: place the wick over the solder which you want to remove.
Second: heat the wick and sold area by the soldering iron.
Next: remove the wick once the solder has been absorbed.
Last: cut off the wick you have used, repeat this process if needed.
Specifications
Desoldering Pump
Material: ABS
Length: 206mm
Diameter: 20mm
Solder Wick
Material: Copper with rosin
Wideth: 2.0mm/2.5mm/3.0mm
Length: 1.5m
Diameter: 55mm
Package include
1 * Desodering Pump
2 * Solder Wick 1.5M x 2.0mm
2 * Solder Wick 1.5M x 2.5mm
2 * Solder Wick 1.5M x 3.0mm
Product Warranty
All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.
7. Desoldering Vacuum Pump, Large, Teflon Tip, Antistatic
8. TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering
Feature
- 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
- 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
- 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
- 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
- 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
9. Velleman VTDESOL3U Vacuum Desoldering Pump With Heater 30W
Description
VELLEMAN VTDESOL3U VACUUM DESOLDERING PUMP WITH HEATER 30W
10. OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) – Desoldering Vacuum Pump Solder Removal Tool
Feature
- Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
- Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
- Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
- Compact and Lightweight. Measuring 7.48”X0.79”, the desoldering pump can be used with only one hand, either your right or left hand.
- Solid Construction. The solder sucker has plastic backing to ensure stability.
Conclusion
By our suggestions above, we hope that you can found Vacuum Solder for you.Please don’t forget to share your experience by comment in this post. Thank you!
